Medical bone plates, bone screws and fixation devices are used throughout the body for a variety of trauma conditions and disorders. We provide testing of these devices to ensure they function safely when they are needed most.

As an industry leader in medical device testing, we have experience testing a variety of products for mechanical strength and durability, including fatigue, bend, and torsion testing. Our labs also offer complementary services, including particulate testing, porous coating evaluation and in-house project management.Ìý

OurÌý Trauma Plate, Bone Screw and Fixation Device Testing

In addition to providing test design and support for custom projects, we routinely test to ASTM F382 and ASTM F384 for bone plates, ASTM F543 for bone screws, and ASTM F1541 for external fixation devices. For projects with different requirements, our experts can help identify the most appropriate standard for testing. We can also provide guidance and support for testing to regulatory requirements, including the FDA 510K.

Some of the devices that we test include:

  • Bone plates and bone screws
  • Spinal fixation assemblies
  • Intramedullary rods and nails
  • External Fixation Devices
  • Pins
  • Staples
  • Bone anchors
  • Sutures
  • Cables and Wires

For more information about our bone plate, bone screw and fixation device testing, or to request a quote, contact us today.

Trauma Device Testing
service

Internal Fixation Devices

JVIDÊÓƵ provides a comprehensive suite of testing solutions for internal fixation devices, from bone plates and screws to intramedullary rods and nails. Common tests performed include static bending, tension, and torque along with a variety of fatigue tests.

Bone Plates (ASTM F382 & F384)

Bone plates are tested to determine both static and dynamic bending properties. Samples are loaded into a 4 point bend test fixture and either bent to failure or cycled to a run-out of 1,000,000 cycles. Angled plates are tested in the same manner, with ASTM F384 guiding these specific angled designs.

Bone Screws (ASTM F543)

Bone screws must withstand a battery of testing as prescribed in the various annexes of ASTM F543. This testing includes torsional properties, insertion/removal torque, axial pullout force, and self-tapping performance (if applicable).Ìý

Ìý
External Fixation Device 640 x 480 May 2018
service

External Fixation Devices

Due to the modularity of many external fixators, there are a variety of test methods available depending on the application of your specific assemblage. JVIDÊÓƵ’s team can assist you in determining the most appropriate test methods for your device.

External Skeletal Fixation Devices (ASTM F1541)

This specification outlines how to perform static and dynamic testing on external fixation devices to determine the mechanical properties of the device. ASTM F1541 defines the test procedures for various assemblages, including:

  • Connectors
  • In-plane compression of ring elements
  • Joints
  • Anchoring pins
  • Subassemblies
  • Schanz Screws

Ready to request a quote?

Our deliverable is certainty - high quality data, test reports and certificates that you can absolutely rely on when making decisions about your materials and compliance. Engage with an expert today.

Contact us
More details

Other Product Qualification Testing Services

Accelerated Aging Accelerated Weathering Testing Acceleration Testing Advisory Services Aircraft Ditching Testing Altitude Testing and Simulation Bespoke Fire Testing Bird Strike Testing Breath Alcohol Ignition Interlock Device Component High Cycle Fatigue Testing Cone Calorimetry Doors and Windows Testing Dynamics Testing Electromagnetic Compatibility (EMC) Testing Electronics Test Methods Environmental Stress Screening (ESS) Test Environmental Testing Explosive Atmosphere Testing and Certification External Cladding Fire Resistance Flame Fire and Flammability Testing Fluid Susceptibility Testing
Fuel System Testing Hail Impact Testing HALT Testing and HASS Testing Hardware Testing High Cycle Fatigue Testing High Level Acoustic Noise Testing Highly Accelerated Stress Testing Hose Testing Humidity Testing Hybrid and Electric Vehicle Battery Testing Ingress Protection Testing International Certifications and Approvals Liquids and Fuels Testing Low Lubricity Aircraft Fuel Testing Marine Fire Testing MIL-STD-810 Testing Plastic Pipes Testing Pneumatics Testing Pressure Testing Product Assessment Reports Product Certification Services Product Compliance Services
Product Safety Testing Radiant Panel Testing Rail Fire Testing Reaction to Fire RTCA DO-160 Testing Salt Fog and Salt Spray Testing Sand and Dust Testing Seismic Testing Shock Testing Space Simulation Spin Testing Steiner Tunnel Testing Structures Testing Temperature and Thermal Testing Thermal Vacuum Testing Towing Trailer and Hitch Product Testing Vibration Testing VOC and SVOC Testing Water Mist Systems Wireless Radio Testing Zigbee Certification Services
Medical device

More from JVIDÊÓƵ

Additional Medical Device Testing 640 x 480

Medical Device Wear Testing

Typical devices that JVIDÊÓƵ performs wear testing on include Hip Prostheses, Total Knee Replacements, Spinal Device, and Small Bone or Join Replacements.

Read more
JVIDÊÓƵ Cincinnati Medical Device Testing

JVIDÊÓƵ CincinnatiÌý

Our Cincinnati laboratory is JVIDÊÓƵ's global Center of ÌýTechnical Excellence for medical device testing.

Read more
JVIDÊÓƵ Global Testing and Approvals Conference

Resources

Discover blog posts, articles, white papers, webinars, and advice from our world-leading testing, inspection, and certification experts.

Read More
Jakucki

Maciej Jakucki

Maciej has over 10 years of experience in medical device testing and analysis for FDA 510(k) and CE submissions.

Meet Maciej

Our team of over 9,000 Engaged Experts in North America, Europe, The Middle East, Australia, Asia and Africa are ready to help you.

Make an inquiry today